handle ermes
-
Handle Fighter
Fighter is equipped with an ergonomic hand support, secured by a screw and a pin. By removing them, it can be replaced with the thumb-only support included in the package. Additionally, the handle features a hook and a line guide hole that can be used with your roller and inverter systems. The hole can also accommodate the accessory for inverter systems, available as an optional purchase.
$150.00 -
Handle Avatar
HANDLE AVATAR
The Avatar handle and muzzles are adaptable to all tubes with an internal diameter of 26 to 26.5 mm. You have to cut the excess parts (the spokes in both the handle and the muzzle) to adapt it to your tube, all Ermes aluminum tubes have an internal diameter of 26.5 mm and all Ermes carbon tubes have an internal diameter of 26 mm, it is advisable not to force the coupling of the carbon tubes and possibly and not to use the o rings, but the caps supplied. IF you use O-rings to seal the pipe, it must be positioned in the correct location as shown in the figure. We are not responsible for damage caused by incorrect assembly
$120.00 – $125.00
