Back
Roll over image to zoom in
$80.90
- Patented dual roller system.
- The box is obtained from a single sheet of metal, and the anchor points are made up of 2 holes for 3 mm diameter pins and one hole for a screw in the top of the box.
- The roller in contact with the shaft is floating, eliminating friction.
- The roller in contact with the trigger completely eliminates friction during the shot.
- The trigger does not harden during the release.
- Smooth shaft release.
- Primarily constructed from AISI 316 stainless steel.
- Manufactured using 3D metal injection molding technology.
- The trigger is made from our specially formulated super-resistant alloy with a hardness of 55HRC.
- The shaft insertion roller is made from 17-4ph and is wear-resistant.
- The line release is rounded; it neither consumes nor damages the line.
- The opening angle of the line release is 65 degrees.
- Tested with a load of 550 kg.
- Weight: 76 grams.
- Patented dual roller system.
- The box is obtained from a single sheet of metal, and the anchor points are made up of 2 holes for 3 mm diameter pins and one hole for a screw in the top of the box.
- The roller in contact with the shaft is floating, eliminating friction.
- The roller in contact with the trigger completely eliminates friction during the shot.
- The trigger does not harden during the release.
- Smooth shaft release.
- Primarily constructed from AISI 316 stainless steel.
- Manufactured using 3D metal injection molding technology.
- The trigger is made from our specially formulated super-resistant alloy with a hardness of 55HRC.
- The shaft insertion roller is made from 17-4ph and is wear-resistant.
- The line release is rounded; it neither consumes nor damages the line.
- The opening angle of the line release is 65 degrees.
- Tested with a load of 550 kg.
- Weight: 76 grams.
by ERMES
https://ermes-sub.com/shop/trigger-mechanisms/evo-back-friction/