Shop
-
Kit Accessories
- Essential accessories kit for wood speargun.
- Components: Line Anchor, Wire Pass Plate, Hilt, Weight Compartment Plate.
- All components are constructed entirely from stainless steel AISI 316.
- Supplied with the required self-tapping screws.
$30.40Kit Accessories
$30.40 -
Stoppper Tube 170
Specific product designed to cushion the elastic bands, featuring rounded corners to prevent line cutting and facilitating the shaft’s exit, made of stainless steel AISI 316.
$31.74Stoppper Tube 170
$31.74 -
Stopper Tube Titanium 110
It’s made from a titanium tube with an outer diameter of 16 mm and an internal diameter of 13 mm, provided with a lightweight and clean design, avoiding cutting the line in abutment with the stopper.”
$34.50Stopper Tube Titanium 110
$34.50 -
-
-
Reel Sea Gul
Explore our medium-capacity vertical reel, expertly crafted to meet all your fishing needs. With an impressive capacity of approximately 45 meters of 1.5 mm line, this reel is your perfect companion for every angling adventure
$50.00 -
Muzzle Roller
Small, light, entirely CNC built, the 28 mm pulleys, are protected by a fairing and can accommodate high-speed ceramic bearings. There are two O-rings seats that make it suitable for mounting of 26 or 26.5 mm barrel.
$50.60 – $98.90 -
Dyneema 1.9 mm Red 50m
These X 16 lines with an X 8 core of 1.9 mm offer exceptional breaking strength, wear resistance, abrasion resistance, UV resistance, buoyancy, and are available in 50-meter coils or up to 100 meters on a single spool. They are made from 100% high modulus UHMWPE polyethylene with an epoxy resin coating.
$50.60Dyneema 1.9 mm Red 50m
$50.60 -
Dyneema 1.9 mm Blue 50m
These X 16 lines with an X 8 core of 1.9 mm offer exceptional breaking strength, wear resistance, abrasion resistance, UV resistance, buoyancy, and are available in 50-meter coils or up to 100 meters on a single spool. They are made from 100% high modulus UHMWPE polyethylene with an epoxy resin coating.
$50.60Dyneema 1.9 mm Blue 50m
$50.60 -
Dyneema 1.9 mm Green 50m
These X 16 lines with an X 8 core of 1.9 mm offer exceptional breaking strength, wear resistance, abrasion resistance, UV resistance, buoyancy, and are available in 50-meter coils or up to 100 meters on a single spool. They are made from 100% high modulus UHMWPE polyethylene with an epoxy resin coating.
$50.60Dyneema 1.9 mm Green 50m
$50.60 -
Dyneema 1.9 mm Black 50m
These X 16 lines with an X 8 core of 1.9 mm offer exceptional breaking strength, wear resistance, abrasion resistance, UV resistance, buoyancy, and are available in 50-meter coils or up to 100 meters on a single spool. They are made from 100% high modulus UHMWPE polyethylene with an epoxy resin coating.
$50.60Dyneema 1.9 mm Black 50m
$50.60 -
-
-
Pulley D36H06 Ceramic Pair
“Pulley entirely CNC machined in Delrin for 6 mm shafts, with a maximum diameter of 36 mm, a width of 6 mm, and a groove of 28 mm, featuring a ceramic bearing.”
$55.55Pulley D36H06 Ceramic Pair
$55.55 -
-
Mask Action
Silicone mask with integrated Action Cam attachment. Tempered glass. Quality silicone, for high visibility and adherence. Suitable for spearfishing, snorkeling and scuba diving
$57.50Mask Action
$57.50 -
Mask Big Action
Extremely low volume mask. frame inserted by fusion. Preformed nose. Strap with adjustable buckle. Tempered glass. Matt external silicone. Suitable for Free dive ,spearfishing, snorkeling.
$57.50Mask Big Action
$57.50 -
FlashLight Lair
Battery type : 18650, 30,000 Hours, which eliminates the trouble of replacing the lamp, Led: XML L2 , 3.7 V ,1600 Lumen max , 6000 k
$57.50FlashLight Lair
$57.50 -
-
-
Reel Albatros
This reel features precision CNC-machined Pom C components for durability in marine conditions, reinforced coils with 30% carbon fiber, a choice of six colors, high-quality AISI 316 stainless steel parts for corrosion resistance, an easily extractable handle, and a versatile clutch knob with 12 positions. The low profile model has an 80mm diameter and 32mm height with a 30m line capacity, while the high profile model has a 52mm diameter with a larger 50m line capacity.
$60.84 – $68.77 -
Mask Minimal
Extremely low volume mask. Frame inserted by fusion. Preformed nose. Strap with adjustable buckle. Tempered glass. Matt external silicone. Suitable for free dive ,spearfishing, snorkeling
$60.95Mask Minimal
$60.95 -
Mask Vision
Silicone mask in various style even with integrated Action Cam attachment.
$60.95 -
Muzzle Formula Invert
This muzzle is small, lightweight, and made entirely of nylon with 30% fiberglass. In the center of the muzzle, there are attachments for the inverter system. The 30 mm pulleys are protected by a fairing and can accommodate high-speed ceramic bearings. Additionally, there are two O-ring seats that make it suitable for mounting a 26 or 26.5 mm barrel.
$62.10 – $106.95 -
Pulley D30H011 Ceramic Pair
“Pulley entirely CNC machined in Delrin for 6 mm shafts, with a maximum diameter of 30 mm, a width of 8 mm, featuring a ceramic bearing.”
$62.10Pulley D30H011 Ceramic Pair
$62.10 -
Reel Colibri
Small capacity vertical reel, about 25 meters of 1.5 mm line. entirely CNC built. clutch knob and removable handle both with ball operation. Coil D 46
$63.00Reel Colibri
$63.00 -
Pulley D28H16 Ceramic Pair
Pulley entirely CNC machined in Delrin for 6 mm shafts, with a maximum diameter of 28 mm, a width of 16 mm, and a groove of 20 mm. featuring a ceramic bearing”
$64.44Pulley D28H16 Ceramic Pair
$64.44 -
Pulley D36H16 Ceramic Pair
“Pulley entirely CNC machined in Delrin for 6 mm shafts, with a maximum diameter of 36 mm, a width of 16 mm, and a groove of 28 mm, featuring a ceramic bearing.”
$65.55Pulley D36H16 Ceramic Pair
$65.55 -
-
Flashlight DEN
Battery type : multiple possibilities 26650 or 18650 or 3 AAA, 50,000 Hours, which eliminates the trouble of replacing the lamp
$73.60Flashlight DEN
$73.60 -
Reel Falco
Two models, from about 50 meters to 100 meters of 1.5 mm wire. clutch knob and pullout handle both with ball operation. Box in stainless steel or titanium., both stile have titanium handle . 60mm and 77mm coil diameter.
$75.00 – $88.00 -
Mechanism Avatar
TRIGGER AVATAR
Lightweight 1.5 mm box mechanism, small line release and short trigger, components in AISI 316 steel, equips our speargun , can be mounted with 2 lateral pins [you can request the safety glass loaded nylon. Gold colour available and steel .
$77.00 – $82.00 -
Float Torpedo
Sturdy canvas float, equipped with regulation flag, various rings and connection rope.
$80.00Float Torpedo
$80.00 -
Back
Patented dual roller system, single-sheet metal box with anchor points, floating roller reduces friction on shaft, friction-free trigger, non-hardening trigger release, smooth shaft release, primarily AISI 316 stainless steel, 3D metal injection molding, trigger made from super-resistant alloy (55HRC), wear-resistant 17-4ph shaft insertion roller, rounded line release that doesn’t damage the line, 65-degree line release angle, tested with 550 kg load, weight: 76 grams.
$80.90Back
$80.90 -
Evo Back Double Roller
Same dimensions and features as the Back model changes instead the assembly will be carried out from the top with three screws in line on the upper floor of the box.
$83.20Evo Back Double Roller
$83.20 -
-
-
-
Handle Avatar
HANDLE AVATAR
The Avatar handle and muzzles are adaptable to all tubes with an internal diameter of 26 to 26.5 mm. You have to cut the excess parts (the spokes in both the handle and the muzzle) to adapt it to your tube, all Ermes aluminum tubes have an internal diameter of 26.5 mm and all Ermes carbon tubes have an internal diameter of 26 mm, it is advisable not to force the coupling of the carbon tubes and possibly and not to use the o rings, but the caps supplied. IF you use O-rings to seal the pipe, it must be positioned in the correct location as shown in the figure. We are not responsible for damage caused by incorrect assembly
$120.00 – $125.00 -
Reel Leonardo
We produce two models, vertical and horizontal, some models are entirely CNC produced and using the best materials: fiberglass reinforced nylon, Pom C, AISI 316 stainless steel, and for the flat metal parts, stainless steel and on request, titanium.
$138.87 – $152.10 -
Carbon Avatar
Molded 100% twill carbon tube. Internal diameter 26 mm external 30.4, standard rod guide height 26.5 mm. Maximum width 88mm. Defect-free high-temperature processing. Processing with 3 compartments for greater lightness, strength and buoyancy . Standard sizes from 90 to 140 cm, it is possible to customize the size and brand for large requests. 100% hydrodynamic designs. Supplied with 2 silicone caps
$252.00 – $390.00 -
Speargun Avatar DB
“Pre-assembled professional double bands combination, allowing you to add or change colors and accessories by visiting the ‘Build My Speargun‘ page.”
$254.75 – $303.25 -
Speargun Avatar Carbon Cuttlefish IR
“Combinación de rodillos invertidos profesionales premontados, que permiten añadir o cambiar colores y accesorios enviando un correo electrónico a infoermessub@gmail.com
$262.00 – $400.00Speargun Avatar Carbon Cuttlefish IR
$262.00 – $400.00 -
Float BigGame
30 Liters, Abrasion resistant, strong material, 29 PSI 2 ATM, 14 stainless steel rings, 3 sturdy handles, Regulation spearfishing flag, Inflator adaptor, kit repair,whistle
$280.00Float BigGame
$280.00 -
Avatar Glass Fins
100% Hi-Tech fiberglass composite blades, High temperature/pressure vacuum flawless manufacturing, All lenght variable thickness assures optimum hydrodynamic thrust, Model (M) 705 x 195 mm, total 833 mm, blade angle 30 degrees, The rigid and comfortable foot pocket ensures fluid and optimal kicking. The short clip-onblade-side tendom connection and the 2-screw fitting ensure perfect blade holding, making the use of fixing glue unnecessary. Marine PVC guiderails in different colors. 7)Footpocket sizes: 41-42, 43-44, 45-46.
$280.00 -
Speargun Avatar MR
“Professional mono roller speargun combination already assembled, in which you can add or change colors and accessories by visiting the ‘Build My Speargun‘ page.”
$284.35 – $332.85 -
Speargun Avatar 3B
Professional combination three bands already assembled, where you can add or change colors and accessories by visiting the ‘Build My Speargun‘ page
$289.40 – $345.40
